Animas OneTouch Ping Owner's Booklet page 48

CHAPTER 6 - USING BASAL PROGRAM FEATURES
2.
The "Change" % field will flash to indicate Edit
mode. Use the / buttons to enter the
percentage change desired. Press the
exit Edit mode.
A1-WEEKDAY
TEMP BASAL
Change:
-40%
3.
Duration:
2.0 Hr
Go
Main Menu
4.
Use the / buttons to enter the duration desired. Press
5.
"Go" is highlighted. Press
CAUTION: The lowest basal delivery amount possible is 0.025U/Hr.
When you set a negative temporary basal rate, your pump will beep
and display an Alert screen to remind you of the minimum delivery
limit. This screen will display once for 5 seconds and give one audible
alert (if you turned on Alert sounds in Setup).
6.
The Home screen is displayed and shows your Temp Basal is active, the
percentage change, the duration and how much time is left. When the duration
of time is complete, your pump will automatically resume the active basal
program.
NOTE: If you turned on the Temp Basal sound in Setup, your pump will beep
once every 30 minutes to remind you of Temp Basal status.
button to
The "Duration" field is highlighted. Press
to activate Temp Basal.
34
A1-WEEKDAY
TEMP BASAL
Change:
0%
Duration:
4.0 Hr
Go
Main Menu
to activate Edit mode.
to exit Edit mode.
A1-WEEKDAY
TEMP BASAL
Change:
-40%
Duration:
4.0 Hr
Go
Main Menu
Alert
Temp Active
Minimum
Basal rate
limited to
0.025U/Hr
2 : 27
PM
TEMP BASAL
-40% 4.0 Hr
Time Left 1.2 Hr
Insulin: 105U
Status Menu