Animas OneTouch Ping Owner's Booklet page 230

CHAPTER 6 - TROUBLESHOOTING YOUR ONETOUCH
Notification
Current calculator
settings may not be
appropriate for
time of day.
Use Calculator Set-up
to edit settings.
Confirm
Notification
Function not available.
Device must be paired.
Confirm
Notification
Pump and meter glucose
units do not match.
Contact Customer Service.
Confirm
Notification
RF communication
deactivated.
Confirm
Notification
Please use the same RF
channel as the paired
pump!
Confirm
®
INDICATES
You have chosen to unpair your
meter remote and pump. The
current calculator settings last
saved may not be appropriate for
the current time of day.
You have tried to initiate a pump
function, but your meter remote
and pump are not currently paired.
The glucose unit of measure on
your meter remote does not match
the glucose unit of measure on
your pump. They must match for
the pairing procedure to be
successful.
You have deactivated RF
communication between your
meter remote and pump.
The RF channel on your meter
remote and pump must be set to
match for the devices to
communicate.
212
PING ™ SYSTEM
Press to confirm the Notification.
It is important that you review
these settings before using the
ezCarb or ezBG feature on your
meter remote to see that they still
would apply. You may edit the
settings in Calculator Set-up under
the Meter Settings screen if your
meter remote and pump are
unpaired. You may also edit the
settings directly on the ezCarb and
ezBG Bolus screens.
Press to confirm the Notification.
Complete the pairing procedure on
your meter remote and pump.
Press to confirm the Notification.
Call Customer Service immediately
at 1 877 937-7867.
Press to confirm the Notification.
Press to confirm the Notification.
If you are manually setting the RF
Channel on your meter remote,
make sure it matches the RF
channel on your pump (see page
186).
WHAT TO DO