Chapter 1 - Setting Up Your Onetouch - Animas OneTouch Ping Owner's Booklet

CHAPTER 1 - SETTING UP YOUR ONETOUCH

Getting to know your OneTouch
LED Indicator Light
Flashes green during normal
operation and red when there is
an alarm or warning.
USB Data Port
Used to download logbook
memory to a PC.
®
SmartChip Port
Will be used in the future
to install software upgrades.
(Feature not yet available
for use.)
Back Button
Turns your meter remote display
on/off. Navigates you back to
the previous menu item.
SIDE
Cradle Connector
Will be used in the future
to link to partner devices.
(Feature not yet available
for use.)
® ™
Ping Meter Remote and Test Strips
FRONT
Up and Down buttons
Scroll through/highlight menus, code numbers, and logbook
records. Select or change information.
BACK
Battery
Compartment
BOTTOM
105
® PING ™ METER REMOTE
Test Strip Port
Insert test strip here to turn
meter remote display on for
testing.
Display with Backlight
BG test results, messages,
symbols, and other data
appear here.
This is the pre-set unit of measure.
OK Button
Turns your meter remote display
on. Turns the display backlight
on/off. Confirms menu
selections.
TEST STRIP
Edge to apply sample
1
Confirmation
Window
Contact Bars
Insert into test port