Animas OneTouch Ping Owner's Booklet page 44

CHAPTER 6 - USING BASAL PROGRAM FEATURES
2.
Scroll to select the program "1-WEEKDAY" and press
NOTE: You do not have to Suspend your pump to edit an active program.
When you select "Edit" from the BASAL MENU, your pump automatically
suspends delivery. When you exit the Edit mode, the active program
delivery automatically resumes.
3.
The BASAL OPTIONS screen is displayed. "Edit" is highlighted. Press
the button. From the EDIT BASAL screen, you can edit the basal segments
of the selected program.
EDIT BASAL
Total 0.00U
4.
Start E U/Hr
12:00A 0.000
- - : - - - - .- - -
activate Edit mode (indicated by flashing cursor).
Save/Review
EDIT BASAL
5.
Total 0.60U
Start E U/Hr
12:00A 0.025
and exit Edit mode for this field.
- - : - - - - .- - -
Save/Review
6.
EDIT BASAL
Total 0.60U
Start E U/Hr
to activate Edit mode (indicated by flashing cursor).
0.025
12:00A
4:00A - - .- - -
NOTE: The next available empty basal segment will appear automatically as
you program the previous segment. If the next empty basal segment does not
appear, you have programmed all 12 possible segments.
Save/Review
EDIT BASAL
7.
Total 13.60U
Start E U/Hr
12:00A 0.025
mode. Segments can start on the hour or half hour.
4:00A 0.675
- - : - - - - .- - -
NOTE: The 24-hour Total changes automatically as you change U/Hr settings.
Save/Review
Scroll to the desired "U/Hr" field. Press
Use / buttons to set desired basal rate. Press
Scroll down to select the next "Start" time field. Press the
Change next "Start" time field as desired, press the
30
.
Total
Temp
A1-WEEKDAY
Main Menu
BASAL OPTIONS
A1-WEEKDAY
Total
Clear
Edit
Review
Go
Main Menu
to
to confirm
button to exit Edit
BASAL MENU
0.00U
0.00U
button