Loading Roll Media; To Change The Roll - HP DesignJet 330 User Manual

Loading roll media

To change the roll

You can order spare spindles as accessories – see page 10–17. In this way, you can
keep different rolls on different spindles and make this task easier. However,
except where noted, this section assumes that you are using the same spindle for
both the old and the new roll.
1 Be sure the plotter wheels are locked (the brake lever pressed down) to prevent the
plotter from moving.
In the next step (see next page):
W A R N I N G
Don't touch the stainless steel strip that runs the length of the plotter behind
the cartridge carriage; its edge is very sharp.
Keep hair, jewelry, clothing, and foreign objects away from the plotter
mechanisms.
This is the black on page 2–17 (seq: 57)
This is the cyan on page 2–17 (seq: 57)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note. .Treat as new.
Working with media

Loading roll media

2–17