HP DesignJet 330 User Manual page 7

6 Reconfiguring your plotter
To see the current configuration of the plotter
To change the serial interface settings
To change the graphics language setting for less common applications
To change the I/O timeout setting
To upgrade your plotter with more memory
File size and memory usage
To upgrade your plotter with a network interface
To upgrade the HP DesignJet 330 plotter with color
7 Maintaining your plotter
Replacing cartridges
When to replace cartridges
Using genuine HP supplies
Before replacing cartridges
To replace one or more cartridges
Cleaning the cartridge nozzles (priming)
Cleaning the plotter
8 Front-panel lights
9 Troubleshooting
Using the documentation
Locating the source of your problem
Solving media-handling problems
If the plotter will not accept your media
If the plotter continually rejects your media, with the Error and Load Media
lights flashing
Clearing a media jam
Solving communication problems
Solving problems with plot position or content
If the plot is completely blank
If the output contains only a partial plot
If the plot is clipped
If the entire plot is in one quadrant of the correct plotting area
If one plot overlays another plot on the same sheet
If the output is distorted or unintelligible
If the plotter has drawn a different plot than the one you were
expecting
If pen settings seem to have no effect
This is the black on page vii (seq: 7)
This is the cyan on page vii (seq: 7)
Company confidential. Pelican User's Guide, Ed1, Final. Freeze Status: frozen
6-3
6-4
6-4
7-2
7-2
7-3
7-4
7-5
7-7
7-9
9-2
9-3
9-4
9-4
9-5
9-8
9-9
9-10
9-11
9-11
Contents
6-2
6-3
6-4
6-5
6-5
9-4
9-9
9-9
9-10
9-10
9-11
vii