HP DesignJet 330 User Manual page 70

To cut and unload a plot from a roll in Pause mode
This mode is the default, and is indicated by the
1
When the plot is finished, the
light stops flashing and goes off.
Holding the media taut on the left,
adjacent to the cutter, slide the cutter
from left to right and then back again,
to cut the plots from the roll.
2–30
This is the black on page 2–30 (seq: 70)
This is the cyan on page 2–30 (seq: 70)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note. .Treat as new.
Roll light not flashing.
Ready
This is the green on page 2–30 (seq: 70)
Working with media
Unloading media
Ready
Roll