Loading Roll Media; To Change The Roll - HP Designjet 350C User Manual
Hewlett-packard designjet plotters user's guide
Hide thumbs
Also See for Designjet 350C:
- Service manual (268 pages) ,
- User manual (184 pages) ,
- Service manual (16 pages)
Table of Contents
Advertisement
Working with media
Loading roll media
Loading roll media
To change the roll
You can order spare spindles as accessories – see page 10–17. In this way, you can
keep different rolls on different spindles and make this task easier. However,
except where noted, this section assumes that you are using the same spindle for
both the old and the new roll.
1
Be sure the plotter wheels are locked (the brake lever pressed down) to prevent the
plotter from moving.
In the next step (see next page):
W A R N I N G
Don't touch the stainless steel strip that runs the length of the plotter behind
the cartridge carriage; its edge is very sharp.
Keep hair, jewelry, clothing, and foreign objects away from the plotter
mechanisms.
2–17
Advertisement
Table of Contents
