Loading and Unloading Media
To Change a Roll of Media
Make sure the plotter wheels are locked, by firmly pressing down the
brake levers on the wheels.
1
Remove any unused media from the media path as shown on page
7.
2
Remove the old roll by pulling firmly on each end of the spindle.
A
5
Remove the end–cap (B) from the other
end of the old roll.
0021
All manuals and user guides at all-guides.com
B
A
3
Rest the old roll upright on the
floor with media stop (A) at
the top.
4
Pull out the media stop/spindle
and set it aside.
1837a
3
B
Continued...
0022