4
When all the cartridges are installed,
lower the cover.
On the front panel, the
should flash for up to about a minute
and then go off. The
should then be on (together with
Type
and
If you wish, you can now check your cartridge alignment by running the Black
Cartridge Alignment Routine (See page 5–3). However, this is normally only
required for troubleshooting.
This is the black on page 1–13 (seq: 27)
This is the cyan on page 1–13 (seq: 27)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note Treat as new.
light
Ready
light
Load Media
Media
Print Quality
lights).
Setting up your plotter
Task 5: Load the print cartridges
Load Media
1–13