HP DesignJet 330 User Manual page 153

Functional specifications (continued)
Supported Width (carriage axis)
media sizes media sizes
Minimum
210 mm (8.3 in)
Margins Leading edge:
For plotting area Trailing edge:
(media size minus
Sides:
margins), see margins), see
page 10–7
All measurements 2 mm (0.08 in).
1
Resolution
Print color as grayscale
Fast print quality:
Other print qualities:
0.38 mm (0.015 in) or 0.2% of the specified vector length, whichever is greater,
Accuracy
(Maximum
at 23_C (73_F), 50–60% relative humidity, on HP Matte Film.
accumulated error)
Programming HP-GL (7586B), HP-GL/2, HP RTL, PJL
languages
supported
1
The 600 dpi resolution specified is addressable resolution, that is, it refers to the smallest movement the print head
can make between dots rather than to the size of the dot.
2
Except for glossy media types, on which the resolution is always 300 dpi.
3
Except for black with HP RTL, where the resolution is 600 x 600 dpi.
This is the black on page 10–3 (seq: 153)
This is the cyan on page 10–3 (seq: 153)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note. Very similar to Loquillo 750C UG parts of pp11-2 and 11-3.
Length (paper axis)
Maximum Minimum
E/A0-size plotter: 210 mm (8.3 in)
917 mm (36.1 in)
D/A1-size plotter:
625 mm (24.6 in)
17 mm (0.67 in)
17 mm (0.67 in)
5 mm (0.2 in)
On Setup Sheet, if Color/Mono is set to:
Print color as color
300 x 300 dpi.
2
600 x 600 dpi. All print qualities:
Reference
Plotter specifications
Maximum
Sheet:
1.32 m (52 in)
Maximum length
of long-axis plot
on roll media:
15.2 m (50 ft)
350C
3
300 x 300 dpi.
10–3