HP DesignJet 330 User Manual page 100

Special internal plots
Using the Color Cartridge Test Sheet
2
When you have correctly loaded the sheet
(when the Ready
press the Continue Plotting
simultaneously.
The Color Cartridge Test Sheet is printed.
An example is shown on page 5–9.
3 When the
Load Media
remove the sheet from the plotter.
Notice that there are two parts, related to two quite distinct tasks:
The part headed
not printing correctly. It is to be used when cleaning the nozzles (priming) – see
page 7–7. Some examples of the patterns when a cartridge is not printing
correctly are shown here:
White streak
White gaps
5–8
This is the black on page 5–8 (seq: 100)
This is the cyan on page 5–8 (seq: 100)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note. JKCT: Steps 3 and 4 very similar to Parrot UG p3-9.
light is on and steady),
keys
light comes on (not flashing), the plot is finished. Simply
To check the nozzles lets you see if any of the cartridges is
This is the magenta on page 5–8 (seq: 100)
Form Continue
+
Feed Plotting
1002