HP DesignJet 330 User Manual page 65

10
While the cover is open, the plotter will pause, waiting for you to trim the front
edge of the roll.
Trim the roll, as follows. Holding the front edge of the media taut, on the left
adjacent the cutter, slide the cutter from left to right and then back again.
11 Lower the cover.
This is the black on page 2–25 (seq: 65)
This is the cyan on page 2–25 (seq: 65)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note. .Treat as new.
This is the green on page 2–25 (seq: 65)
2–25