To Advance The Media - HP DesignJet 330 User Manual

To advance the media

Pressing the
the media out of the media exit slot.
You may want to do this:
when the plotter is in Continuous Plotting mode, you have reached the end of a
series of plots and want to cut the roll after the last one (see page 2–31), or
to eject damaged media after clearing a media jam (see page 9–5).
There is no need to use
page 2–28.
Don't press
terminates the data transmission (unless you are doing this as part of a
troubleshooting routine – see page 9–9).
This is the black on page 4–3 (seq: 91)
This is the cyan on page 4–3 (seq: 91)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note. Treat as new.
key advances
Form Feed
to unload a plotted sheet from the plotter – see
Form Feed
Form Feed while a file is being received by the plotter, as this
Managing your plots
To advance the media
Form Feed
4–3