HP DesignJet 330 User Manual page 45

Recommended print-quality settings and recommended media
350C
for color plots
HP media
HP Opaque Bond
HP Translucent Bond
HP Natural Tracing Paper
HP Vellum
HP Coated Paper
HP Heavyweight Coated Paper
HP Matte Film
HP Clear Film
HP High-Gloss White Film
1
The limitation on the use of non-coated media for color really depends on:
D the amount of area fill in your drawing (the more there is, the less likely that
the print quality on opaque bond will be satisfactory),
D the quality of the media.
This is the black on page 2–5 (seq: 45)
This is the cyan on page 2–5 (seq: 45)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note. .This page very similar to Loquillo UG p3–6. J: In Column 1, in the
same cell as HP Natural Tracing Paper, please add YHP Tracing Paper.
Working with media
Print quality
(set either on the front panel
or in the software)
Fast Normal
OK for monochrome, but color for CAD
1
drawings only
OK for monochrome, not recommended for
color
OK for monochrome, but color for CAD
1 1
drawings only drawings only
OK
Not OK for color;
recommended not recommended for
monochrome
Choosing media
Best
2–5