HP DesignJet 330 User Manual page 96

Special internal plots
Using the Black Cartridge Alignment Sheet
2
When you have correctly loaded the sheet
(when the Ready
press the Setup
simultaneously.
The Black Cartridge Alignment Sheet is
printed. An example is shown on
page 5–5.
3 When the
Load Media
remove the sheet from the plotter.
4 Follow the instructions on the sheet itself. As you will see, this involves you
identifying the straightest set of vertical lines in each of the two boxes.
5 If the straightest sets are already the current selection, you need do nothing more.
If not, then mark the appropriate ovals, reverse the sheet as indicated, and reload it.
6
When the Ready
.
Setup
The plotter now reads your marks and
adjusts itself automatically.
5–4
This is the black on page 5–4 (seq: 96)
This is the cyan on page 5–4 (seq: 96)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note. .Treat as new.
light is on and steady),
and Replot keys
light comes on (not flashing), the plot is finished. Simply
light comes on, press
Setup + Replot
Setup
Ready