Page Size And Clipped Plots - HP DesignJet 330 User Manual

Controlling your plot's appearance
Page size

Page size and clipped plots

When setting your page size, be aware that with some combinations of page size
and plot size, the plotter may print what it can, but may clip your plot:
If you specify in your software a page/plot size that is larger than the physical
size of the media loaded in the plotter.
Clipped area
If you specify in software a page size setting that is too small for the plot, the
plot will be clipped, even though the physical media size may be adequate.
If you specify a discrete page size in the Setup Sheet that is too small for the
plot, the plot may be clipped, even though the physical media size may be
adequate.
Clipped area
3–6
This is the black on page 3–6 (seq: 78)
This is the cyan on page 3–6 (seq: 78)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note. .Top part similar to Loquillo 750C UG p4–5..
A2 media in the plotter
A1 page size in software
Page size specified in software
or in Setup Sheet
Full plot size
Physical roll media size