HP DesignJet 330 User Manual page 25

Don't touch the stainless steel strip that runs the length of the plotter behind
W A R N I N G
the cartridge carriage; its edge is very sharp. Keep hair, jewelry, clothing, and
foreign objects away from the plotter mechanisms.
A set of cartridges was supplied with the plotter:
330
The HP DesignJet 330 is supplied with one black cartridge.
The HP DesignJet 350C is supplied with four cartridges:
350C
–
–
–
–
For the 350C, each stall in the carriage has a dot indicating the color of the
cartridge that should be installed: you must put the correct cartridge in the correct
stall. The sequence of the stall colors is, from left to right, yellow, cyan, magenta
and black.
For users with color-vision deficiencies. You can identify the colors of the
cartridges by the part numbers on the boxes – see page 10–17.
Note. It is not recommended to operate the 350C with only the black cartridge
loaded.
This is the black on page 1–11 (seq: 25)
This is the cyan on page 1–11 (seq: 25)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note Treat as new.
yellow
cyan
magenta
black
This is the magenta on page 1–11 (seq: 25)
This is the yellow on page 1–11 (seq: 25)
Setting up your plotter
Task 5: Load the print cartridge(s)
Yellow
Cyan
Magenta
Black
00019
1–11