Task 6: (Optional) Change The Language - HP DesignJet 330 User Manual

Setting up your plotter

Task 6: (Optional) Change the language

Task 6: (Optional) Change the language

All the plotter's internal plots are available in the following languages: English,
French, Italian, German, Spanish, Portuguese and Japanese. By default, the
language is English. If English is what you want, then you can skip this task and
go to task 7.
To change from English to any of the other languages, you must use the plotter's
Setup Sheet, as explained below.
1
Load a sheet of A-size or A4-size plain paper, in portrait orientation. For
guidance on loading a sheet, see page 2–9.
When the Ready
Plot will be on underside.
1–14
This is the black on page 1–14 (seq: 28)
This is the cyan on page 1–14 (seq: 28)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note JKCT: Similar to Parrot UG p1–18.
light is on, you have loaded the sheet correctly.
1750