HP DesignJet 330 User Manual page 50

Working with media
Loading sheet media
3 Which side down? As you load the sheet, it is the underside on which the plotter
will print. With most media types, the two sides are different and so it is important
to load the sheet correctly.
Media Type
Opaque bond
Translucent bond
Natural tracing paper
Vellum
Coated paper
Heavyweight coated paper
Matte film
Clear film
High-gloss white film
350C
2–10
This is the black on page 2–10 (seq: 50)
This is the cyan on page 2–10 (seq: 50)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note. .This page very similar to Loquillo UG p3–17.
Which side down?
Both sides are the same. If the sheet is curled,
load with the curl up .
Load with the coated side down.
On HP Coated Paper and Heavyweight Coated
Paper, look for the small notch in the corner:
D When loading in a portrait orientation, make
sure the notch is on the right side of the leading
edge.
D When loading in a landscape orientation, make
sure the notch is on the left side of the leading
edge.
Load with the matte side down.
Load with the rougher side down.
Load with the rougher side down.