HP DesignJet 330 User Manual page 90

Managing your plots
To copy a plot / To copy a plot
To cancel a plot
X
To cancel the current plot while it is
being received, or while it is printing,
press Cancel
The canceled plot stays in memory
until you send another, and so you can
subsequently use
again. Note that, for these purposes,
any internal plot (see chapter 5) counts
as another plot.
To copy a plot
To print another copy of the last plot,
press Replot
It will be printed with the same
settings for
Quality
you've changed them on the front
panel.
Replot does not work if:
another file has already been sent to the plotter (including internal plots, for
example the Setup Sheet), or
you have switched the plotter off and on again since first sending the plot.
4–2
This is the black on page 4–2 (seq: 90)
This is the cyan on page 4–2 (seq: 90)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note. Treat as new. Localization Note. Treat as new.
.
Replot to print it
.
Media Type and Print
as the original copy, even if
Cancel
Replot