Enabling The Dhcp Server Feature - Panasonic KX-NS1000 Installation Manual

Pure ip-pbx
Hide thumbs Also See for KX-NS1000:
Table of Contents

Advertisement

5.4.2 Enabling the DHCP Server Feature

During a long programming session, it is highly recommended that you periodically save the system
data to the Storage Memory Card. If the PBX undergoes a sudden power failure or if the system is
reset for some reason, all the system data in RAM will be lost. However, if system data has been saved
to the Storage Memory Card, it can be easily reloaded.
To save the system data to the Storage Memory Card while programming, click the disk button (
® Yes ® OK. Be sure to save the system data to the Storage Memory Card before restarting the PBX,
or any changes may be lost.
When no operations are performed for more than 60 minutes (default), you will be automatically logged
out from Web Maintenance Console and unsaved data will be lost.
Changing the Display Language
The language used for Web Maintenance Console can be changed after the Easy Setup Wizard has completed.
Click Setup ® Users ® User Profiles.
1.
2.
Select the check box for the Installer level account.
3.
Click
.
The Edit User screen will be displayed.
4.
Select the preferred language in Change Language.
5.
Click OK.
The screen will redisplay in the selected language immediately.
5.4.2 Enabling the DHCP Server Feature
This PBX is equipped with a DHCP Server feature. When the feature is enabled, it allows you to centrally
manage and automate the assignment of IP addresses for the devices located in same LAN using Web
Maintenance Console.
Note
If an external DHCP server is in use, do not enable the DHCP Server feature. Doing so may allocate
inappropriate IP addressing information to the devices.
148
Installation Manual
Click Setup ® Network Service ® Server Feature ®
1.
DHCP.
2.
On the DHCP Server tab, select Enable for DHCP
Server.
3.
Enter valid settings for the IP address auto
assignment.
Note
For details about IP address auto assignment
settings, refer to "27.2.1 Network Service—Server
Feature—DHCP" in the PC Programming Manual.
4.
Click OK.
)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents