Panasonic KX-NS1000 Installation Manual page 143

Pure ip-pbx
Hide thumbs Also See for KX-NS1000:
Table of Contents

Advertisement

5.
It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorised access. For a list of numbers and characters that can be used in system
passwords, refer to "1.1.3 Entering Characters" in the PC Programming Manual.
Connecting to Web Maintenance Console
1.
Connect the PC to the PBX:
Connect the PBX to a PC with the MNT port and access the PBX directly from the PC. For details, refer
to "Direct Connection" in "5.2 PC Connection".
Connect the PBX to a network with the LAN port and access the PBX from a PC in your LAN or VPN.
For details, refer to "Connection via LAN", "Connection via Virtual Private Network (VPN) " and
"4.10.1 LAN Connection for the Main Unit".
Connect the PBX to a network with the LAN port and access the PBX from a PC using an Internet
connection. For details, refer to "Connection via Internet" and "4.10.1 LAN Connection for the Main
Unit".
2.
Access Web Maintenance Console:
MNT Port Connection:
Launch your Web browser and in the address bar, enter the following address exactly as shown:
http://kx-ns1000.
Note
Be sure to include the period at the end as shown.
LAN or VPN Connection:
Launch your Web browser and input the IP address of the PBX followed by the Web Maintenance Console
port number into the address bar. The input method will differ according to the PC's connection to the PBX.
The default IP address for the LAN port of the PBX is 192.168.0.101, and the default Web Maintenance
Console port number is 80. Accordingly, the address to enter to connect to the PBX for the first time will
be as follows (enter the address exactly as shown):
http://192.168.0.101
Internet Connection (SSL Connection):
When the PC is accessing the PBX from a connection over the internet, the use of SSL is strongly
recommended. When using an SSL encrypted connection, the default port is 443. The format of the address
to enter to connect to the PBX using an SSL encrypted connection will be as follows:
https://xxx.xxx.xxx.xxx:yyy
"xxx.xxx.xxx.xxx" is the IP address of a device that can be accessed from the Internet, such as the
IP address of a network router.
"yyy" is a port number. The network router's port forwarding settings must be configured so that traffic
arriving at port "yyy" is forwarded to the correct IP address and port of the PBX in the LAN.
Port forwarding settings must specify the IP address and the port number of the network router
("xxx.xxx.xxx.xxx:yyy") to transfer the packets to the PBX in the LAN, so that the packets sent to the
global IP address and specified port of the router will be transferred to the IP address and specified
port of the PBX in the LAN.
Note the usage of "https" instead of "http".
If you connect to Web Maintenance Console using SSL, a security alert window is displayed. Follow
the prompts to install a security certificate. The procedure may vary according to your browser.
Note
The IP address and Web Maintenance Console port number for the PBX can be changed from their
default values. If settings for the LAN port's IP address or port number has been forgotten, connect
using the MNT port connection as described above and confirm the LAN port's IP address in
5.3 Starting Web Maintenance Console
Installation Manual
143

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents