Panasonic KX-NS1000 Installation Manual page 157

Programming for the Extension Number Method
3. a. Click Setup ® PBX Configuration ® System.
b.
Click Numbering Plan.
c.
Click Main.
d.
Click the Features tab.
e.
In the TIE Line Access cell, type the dialling
number.
f.
Click OK.
Click Setup ® PBX Configuration ® Private
4. a.
Network.
b.
Click TIE Table.
c.
In the Own PBX Code cell, type the PBX code of the
local PBX in the network.
d.
In the first unused Leading Number cell, type the
PBX code of the remote PBX in the network.
e.
In the corresponding Trunk Group list, select the
number of the trunk group to be used when making
calls.
f.
Set the number modification pattern, if necessary.
g.
Click OK.
Click Setup ® PBX Configuration ®
5. a.
Configuration ® Slot.
Click Virtual ® V-IPGW16.
b.
c.
Move the mouse pointer over the installed
V-IPGW16 card to display the menu of options, and
click Ins (in service).
d.
Repeat step c for each installed V-IPGW16 card until
all V-IPGW16 cards are INS.
a. Click Setup ® PBX Configuration ®
1.
Configuration ® Slot.
b. Click Virtual ® V-IPGW16.
c.
Move the mouse pointer over the installed
V-IPGW16 card to display the menu of options.
d.
Click Port Property.
5.6.3 Programming the Network Settings
Installation Manual 157