Slc2/Bri4 Card (Kx-Ns0280) - Panasonic KX-NS1000 Installation Manual

4.5.2 SLC2/BRI4 Card (KX-NS0280)

4.5.2 SLC2/BRI4 Card (KX-NS0280)
Function
A combination card including:
•
4 ISDN Basic Rate Interface ports.
•
2 extension ports with Caller ID (FSK) for SLTs.
EURO-ISDN/ETSI compliant.
To SLT
To NT1/ Extension
Accessories and User-supplied Items
Accessories (included): Ferrite core ´ 2, Screws ´ 4
User-supplied (not included): RJ45 connector, Twisted pair cable
CAUTION
When connecting this optional service card to the trunk, connect through an NT1; do not connect to the U
interface of the trunk directly.
Notice
When connecting the RJ45 connector, attach the included ferrite core. Refer to "4.2.8 Attaching a Ferrite
Core".
Note
• This optional service card has 100 W of terminal resistance. For use in point to multi-point connection,
the card must be placed at the end of the bus.
•
This optional service card can be used for either trunk or extension connection, by setting the A/B
switch or using the connector with appropriate pin assignments.
•
To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "4.12 Starting the
PBX".
Switch Settings
Switch
A/B
106 Installation Manual
RJ45 for SLT RJ45
(LINE 1 to LINE 4)
Type Usage and Status Definition
Slide Select A (default) for trunk or B for extension use.
A
LEDs
B