Panasonic KX-NS1000 Installation Manual page 136

4.12 Starting the PBX
All data, except for system prompts and activation key files, will be erased. Data that is erased includes Unified
Messaging data, call logs, etc. The settings for the PBX as well as all optional service cards will be initialised
to their default values.
Note
•
After the PBX is initialised, you can restore system data to the PBX that has been backed up earlier.
For details about backing up and restoring system data, refer to "6.1 Tool—System Data Backup to
USB", "7.2.2 Utility—File—File Transfer PBX to PC" and "7.2.1 Utility—File—File Transfer PC to
PBX" in the PC Programming Manual.
•
After the PBX is initialised, you must set up the mandatory settings required for both stand-alone PBXs
and PBXs in a One-look network with Easy Setup Wizard. For details refer to "Connecting to Web
Maintenance Console" and "5.4.1 Easy Setup Wizard".
Confirming the Trunk Connection
After the SLC2/LCOT2 card is installed, programme the PBX and connect trunks to the PBX.
If SLC2/LCOT2 card is not installed, this confirmation can be skipped.
To confirm that the trunks are successfully connected, dial [ ] [3] [7] + trunk number (3 digits) on an IP
telephone, or press the IP telephone's S-CO button. You will hear a dial tone if the trunk is available and
connected.
136 Installation Manual