Configuration Of Ip Ports - Panasonic KX-NS1000 Installation Manual

5.8.4 Configuration of IP Ports

5.8.4 Configuration of IP Ports
A KX-NT300 series IP-PT user or KX-NT265 IP-PT user can configure the port number of PTAP, DHCP, and
FTP ports. Consult your network administrator to check whether the configuration of the IP ports is required.
Follow the procedure below to configure the port number of the IP ports.
KX-NT300 series (except KX-NT321)
To start programming
SETUP
Press "SETUP"
when it is displayed.
To configure the port number of PTAP Ports
Select "PTAP Server Port".
Port No.
1024 – 65535
To configure the port number of PTAP Ports for the Secondary PBX (optional for
software version 2.00 or later only)
Select "PTAP Server Port".
Port No.
1024 – 65535
Return to the
Menu screen.
To configure the port number of DHCP Ports
Select "DHCP Server Port".
Select "DHCP Client Port".
Continued on next page
186 Installation Manual
Select "IP Port".
Software version 2.00 or later only
ENTER
ENTER
ENTER
ENTER
Select
"PTAP Client Port".
ENTER
ENTER
Password
ENTER 7678
Select "Primary PBX".
Select "Secondary PBX".
Port No.
ENTER 1024 – 65535
Port No.
67, 1024 – 65535
Port No.
68, 1024 – 65535
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER