Network Configuration - Panasonic KX-NS1000 Installation Manual

Pure ip-pbx
Hide thumbs Also See for KX-NS1000:
Table of Contents

Advertisement

7.1.6 Network Configuration

7.1.6 Network Configuration
You must evaluate the structure of the existing network to see if a VoIP network can be implemented. Below
are the points that should be evaluated.
Is the IP network a managed network?
A VoIP network should be implemented on a managed IP network such as Frame Relay, Leased Line, or
IP-VPN (Virtual Private Network).
An unmanaged network, such as the Internet (including an Internet VPN), cannot be used to employ a VoIP
network because delays and loss in data transmission can cause huge degradation in speech quality.
Is it possible to have static IP addressing?
IP telephones on the network always perform VoIP communications through the PBX. Therefore, the PBX
must be assigned static IP addresses, which must be programmed to each IP telephone on the network.
Note
When the DHCP Server feature is disabled and external DHCP servers are not used, static IP addressing
must also be enabled for all IP telephones.
Does only a single router provide access to the IP network?
In a dual network, 2 routers provide access to the IP network as shown in the diagram below. However, only
one router can be used as an access point to the network.
Therefore, in the diagram below, if router A, whose IP address is assigned as the default gateway IP address
of the PBX and the IP telephones, fails, VoIP communications are no longer possible; they are not able to
switch their default gateway from router A to router B to access the IP network.
Default gateway of
the PBX: Router A
222
Installation Manual
IP Network
Router A
Router B
Default gateway of
the IP Telephone:
Router A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents