Bin-Full Flag Removal - Lexmark CX310n Service Manual

4
Remove the screw (B) securing the AIO release lever to the flatbed.
5
Slide the AIO release lever towards the back of the flatbed.
6
Remove the spring and AIO release lever.
Installation note: When reinstalling the AIO release lever, place the release lever on the flatbed, and then inset
the spring before replacing the screw.
Bin‑full flag removal
1
Lift the scanner assembly and lock it into the up position.
2
Gently disconnect the three snaps (A) from the rear shaft of the redrive unit.
Repair information
238
7527