Parts catalog
•
"Legend" on page 326
•
"Assembly 1: Covers" on page 327
•
"Assembly 2: Scanner" on page 329
•
"Assembly 3: Paperpath" on page 331
•
"Assembly 4: Operator panels" on page 335
•
"Assembly 5: Electronics" on page 339
•
"Assembly 6: Cables and sensors" on page 343
•
"Assembly 7: Media drawers and trays" on page 345
•
"Assembly 8: Options and miscellaneous" on page 347
•
"Screw and retainer identification table" on page 348
Legend
The following column headings are used in the parts catalog:
•
Asm‑index—Identifies the assembly and the item in the diagram. For example, 3‑1 indicates Assembly 3 and item
1 in the table.
•
Part number—Identifies the unique number that correlates with the part.
•
Units/mach—Refers to the number of units actually used in the base machine or product.
•
Units/option—Refers to the number of units in a particular option.
•
Units/FRU—Refers to the number of units in a particular FRU.
•
Description—A brief description of the part.
The following abbreviations are used in the parts catalog:
•
NS (not shown) in the Asm‑index column indicates that the part is procurable but is not pictured in the illustration.
•
PP (parts packet) in the Description column indicates that the part is contained in a parts packet.
Parts catalog
326
7527