Dust Cover Removal; Pick Tires Removal - Lexmark CX310n Service Manual

Dust cover removal

Raise then pull the dust cover to remove it.

Pick tires removal

Note: You will need to have a soft, padded work surface for this removal.
Warning—Potential Damage: Remove only the rubber tires and not the paper pick tire assembly to avoid losing
small parts.
Note: The paper pick tires for the standard media tray are located in the base printer. There are also tires in the
optional 650-sheet Duo Drawer/MP feeder and the optional 550-sheet drawer. If you have one or both of these
additional options, and you are having problems with media picking, replace these tires also. Always replace the
paper pick tires in pairs. The tires come in a package of two.
1
Remove the media tray.
2
Lower the paper pick motor drive assembly.
Repair information
309
7527