84X.xx Service Error Messages - Lexmark CX310n Service Manual

84x.xx service error messages

Error code
840.xx
Scanner error
840.01
Scanner disabled
840.02
Scanner auto disabled
840.03
Scanner cable unplugged
841.xx
842.xx
843.00
843.01
843.02
843.03
843.04
843.05
843.06
843.99
846.00
Calibration Strip Unusable
846.01
846.02
846.03
846.04
846.05
846.06
846.07
Description
Scanner error
The scanner is disabled and can't be used.
Scanner failure: Front side image processing
ASIC. Invalid configuration or ASIC not found
Scanner failure: Communications
Scanner Failure: Carriage failed to Home or
move to desired position
ADF mechanical failure
Generic Mechanical failure detected
Pick Roller Engage Failure
Pick Roller Disengage Failure
Carriage overun
ADF nudger
Scanner complete time-out error
Scanner failure: Calibration strip
Rear Calibration Strip Unusable
Front calibration strip too far left
Front calibration strip too far right
Front calibration strip has excessive skew
Front calibration strip has excessive bow
Front calibration strip has excessive dark area
Front magnification exceeds limits
Diagnostic information
Action
Enter the configuration menu, and reenable
the scanner module. See
check" on page
This message is posted when the MFP PORs.
Enter the configuration menu, and reenable
the scanner module. See
check" on page
Image pipeline ASIC. See
check" on page
home position service check" on page
Communication failure. See
check" on page
See "CCD service check" on page
The front calibrations strip is placed too high
or too low. See
page 137.
See "CCD service check" on page
Front excessive variability for Mono, Red,
Green, or Blue. See
page 137.
Rear excessive variability for Mono, Red,
Green, or Blue. See
page 137.
94
7527
"840.xx service
95.
"840.xx service
95.
"CCD service
137. Also, see "Flatbed
137.
"CCD service
137.
137.
"CCD service check" on
137.
"CCD service check" on
"CCD service check" on