Operating Elements; Clutch Lever; Hand Brake Lever; Short Circuit Button (All Xc-W Models) - KTM 400 EXC EU Owner's Manual

OPERATING ELEMENTS

5 O PERATING ELEMENTS

Clutch lever

5.1

Hand brake lever

5.2
Short circuit button (all XC‑W models)
5.3

Short circuit button (all EXC models)

5.4

Emergency OFF switch (EXC AUS)

5.5
The clutch lever
The clutch is hydraulically operated and self-adjusting.
500133-10
Hand brake lever
The hand brake lever is used to activate the front brake.
400196-10
The short circuit button
Possible states
• Short circuit button
closed, and the engine can be started.
• Short circuit button
a running engine stops, and a non-running engine will not start.
500132-10
The short circuit button
Possible states
• Short circuit button
closed, and the engine can be started.
• Short circuit button
a running engine stops, and a non-running engine will not start.
500134-10
The emergency OFF switch
Possible states
Ignition off – In this position, the ignition circuit is interrupted, a run-
ning engine stops, and a non-running engine will not start.
Ignition on – In this position, the ignition circuit is closed, and the
engine can be started.
500131-10
is fitted on the left side of the handlebar.

is located on the right side of the handlebar.

is fitted on the left side of the handlebar.

in basic position – In this position, the ignition circuit is
pressed – In this position, the ignition circuit is interrupted,
is fitted on the left side of the handlebar.

in basic position – In this position, the ignition circuit is
pressed – In this position, the ignition circuit is interrupted,
is fitted on the left side of the handlebar.

11