Speed Display Mode (Speed); Speed/H Display Mode (Service Hours); Speed/Clk Display Mode (Time); Speed/Lap Display Mode (Lap Time) - KTM 400 EXC EU Owner's Manual

OPERATING ELEMENTS

SPEED display mode (speed)

5.20

SPEED/H display mode (service hours)

5.21

SPEED/CLK display mode (time)

5.22

SPEED/LAP display mode (lap time)

5.23
–
Press the button
the display.
The current speed is displayed in the SPEED display mode.
The current speed can be displayed in Km/h or Mph.
Info
Making the setting according to the country.
When an impulse comes from the front wheel, the left side of the speedometer
display changes to the SPEED mode and the current speed is shown.
400317-02
Condition
• Vehicle at a standstill
–
Press the button
display.
The number of service hours of the engine is shown in the H display mode.
The service hour counter stores the total traveling time.
Info
The service hour counter is necessary for ensuring that maintenance work is car-
400316-01
ried out at the right intervals.
If the speedometer is in the H display mode at the start of the trip, it automati-
cally changes to the ODO display mode.
The H display mode is suppressed during travel.
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
the display.
The time is displayed in the CLK display mode.
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
briefly.
400319-01
–
Press the button
the display.
In the LAP display mode, up to ten laps can be timed with the stop watch.
Info
If the lap time continues after you press the button
already occupied.
Lap 10 must be timed with the button
400320-01
Press the button
Press the button
Press the button
for 3 - 5 seconds.
briefly and repeatedly until SPEED appears on the left side of
briefly and repeatedly until H appears at the bottom right of the
. No function
. No function
The display changes to the Setup menu of the speedometer
functions.
next display mode
briefly and repeatedly until CLK appears at the bottom right of
. No function
. No function
The display changes to the Setup menu of the clock.
next display mode
briefly and repeatedly until LAP appears at the bottom right of
. Starts or stops the clock.
. Stops the current lap time and saves it, and the stop watch
starts the next lap.
The stop watch and the lap time are reset.
, 9 memory locations are
.
16