Speed/Odo Display Mode (Odometer); Speed/Tr1 Display Mode (Trip Master 1); Speed/Tr2 Display Mode (Trip Master 2) - KTM 400 EXC EU Owner's Manual

OPERATING ELEMENTS

SPEED/ODO display mode (odometer)

5.24

SPEED/TR1 display mode (trip master 1)

5.25

SPEED/TR2 display mode (trip master 2)

5.26
Press the button
briefly.
–
Press the button
the display.
The total number of kilometers ridden is shown in the ODO display mode.
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
briefly.
400317-01
–
Press the button
display.
TR1 (trip master 1) runs constantly and counts to 999.9.
You can use it to measure trips or the distance between refueling stops.
TR1 is coupled with A1 (average speed 1) and S1 (stop watch 1).
Info
If 999.9 is exceeded, the values of TR1, A1 and S1 are automatically reset to
0.0.
400323-01
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
display.
TR2 (trip master 2) runs constantly and counts to 999.9.
The displayed value can be set manually with the button
practical function for rides by the road book.
Info
The TR2 value can also be corrected manually during the trip using the but-
ton and the button
400324-01
If 999.9 is exceeded, TR2 is automatically reset to 0.0.
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
briefly.
next display mode
briefly and repeatedly until ODO appears at the bottom right of
. No function
. No function
–
next display mode
briefly and repeatedly until TR1 appears at the top right of the
. No function
. No function
The TR1, A1 and S1 displays are reset to 0.0.
next display mode
briefly and repeatedly until TR2 appears at the top right of the
.
. Increases value TR2.
. Decreases value TR2.
Clears value TR2.
next display mode
17
and the button . A very