MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing the fork legs
9.26
Installing the fork legs
x
9.27
–
Remove the front wheel.
–
Remove screws
–
Remove cable clip
–
Hang the brake caliper and the brake line loosely to the side.
500093-10
(EXC SIX DAYS, XC‑W USA)
–
Loosen screw
–
Loosen screw
500094-10
(EXC EU, EXC AUS, XC‑W ZA)
–
Loosen screw
–
Loosen screw
100023-11
–
Position the fork legs.
Info
The topmost sunk nut in the fork leg must be flush to the upper edge of the
upper triple clamp.
Position the bleeder screw
100021-10
(EXC SIX DAYS, XC‑W USA)
–
Fully tighten screw
Guideline
Screw, top triple clamp
–
Fully tighten screw
Guideline
Screw, bottom triple clamp
500094-11
(
p. 64)
x
and take off clamp.
, remove screw
and take off the brake caliper.
. Remove the fork leg on the left.
. Remove the fork leg on the right.
. Remove the fork leg on the left.
. Remove the fork leg on the right.
to the front.
.
.
M8
17 Nm
(12.5 lbf ft)
M8
12 Nm
(8.9 lbf ft)
42