Speed/A1 Display Mode (Average Speed 1); Speed/A2 Display Mode (Average Speed 2); Speed/S1 Display Mode (Stop Watch 1); Speed/S2 Display Mode (Stop Watch 2) - KTM 400 EXC EU Owner's Manual

OPERATING ELEMENTS

SPEED/A1 display mode (average speed 1)

5.27

SPEED/A2 display mode (average speed 2)

5.28

SPEED/S1 display mode (stop watch 1)

5.29

SPEED/S2 display mode (stop watch 2)

5.30
–
Press the button
display.
A1 (average speed 1) shows the average speed calculated on the basis of TR1 (trip mas-
ter 1) and S1 (stop watch 1).
The calculation of this value is activated by the first impulse of the wheel speed sensor
and ends 3 seconds after the last impulse.
Press the button
Press the button
Press the button
400325-01
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
display.
A2 (average speed 2) shows the average speed on the basis of the current speed if the
stop watch S2 (stop watch 2) is running.
Info
The displayed value can differ from the actual average speed if S2 is not
stopped after the ride.
400326-01
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
display.
S1 (stop watch 1) shows the trip time on the basis of TR1 and continues running when
an impulse is received from the wheel speed sensor.
The calculation of this value starts with the first impulse of the wheel speed sensor and
ends three seconds after the last impulse.
Press the button
Press the button
Press the button
400327-01
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
display.
S2 (stop watch 2) is a manual stop watch.
If S2 is running in the background, the S2 display flashes in the speedometer display.
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
400328-01
briefly.
briefly and repeatedly until A1 appears at the top right of the
. No function
. No function
The TR1, A1 and S1 displays are reset to 0.0.
next display mode
briefly and repeatedly until A2 appears at the top right of the
. No function
. No function
–
next display mode
briefly and repeatedly until S1 appears at the top right of the
. No function
. No function
The TR1, A1 and S1 displays are reset to 0.0.
next display mode
briefly and repeatedly until S2 appears at the top right of the
. Starts or stops S2.
. No function
The S2 and A2 displays are reset to 0.0.
next display mode
18