Checking Antifreeze And Coolant Level; Checking The Coolant Level - KTM 400 EXC EU Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Checking antifreeze and coolant level

9.91
Warning
Danger of scalding The coolant gets very hot when the motorcycle is driven and is under high pressure.
–
Do not open the radiator, radiator hoses or other cooling system components when the engine is hot. Allow the engine and
cooling system to cool down. If you scald yourself, hold the affected area under cold water immediately.
Warning
Danger of poisoning Coolants are poisonous and a health hazard.
–
Avoid contact between coolants and skin, eyes and clothing. If fuel gets into your eyes, rinse immediately with water and
contact a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor
immediately. Change clothes that have come into contact with coolants. Keep coolants out of the reach of children.

Checking the coolant level

9.92
Warning
Danger of scalding The coolant gets very hot when the motorcycle is driven and is under high pressure.
–
Do not open the radiator, radiator hoses or other cooling system components when the engine is hot. Allow the engine and
cooling system to cool down. If you scald yourself, hold the affected area under cold water immediately.
Warning
Danger of poisoning Coolants are poisonous and a health hazard.
–
Avoid contact between coolants and skin, eyes and clothing. If fuel gets into your eyes, rinse immediately with water and
contact a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor
immediately. Change clothes that have come into contact with coolants. Keep coolants out of the reach of children.
–
Stand the motorcycle upright on a horizontal surface.
–
Remove the radiator cap.
–
Check antifreeze of coolant.
−25... −45 °C (−13... −49 °F)
» If the antifreeze of the cooling liquid does not meet specifications:
–
Correct antifreeze of coolant.
–
Check the coolant level in the radiator.
400243-10
Coolant level
» If the level of the cooling liquid does not meet specifications:
–
Correct the coolant level.
Alternative 1
Alternative 2
–
Refit the radiator cap.
–
Stand the motorcycle upright on a horizontal surface.
–
Remove the radiator cap.
–
Check the coolant level in the radiator.
Coolant level
» If the level of the cooling liquid does not meet specifications:
–
Correct the coolant level.
Alternative 1
400243-10
Alternative 2
–
Refit the radiator cap.
above radiator fins.

Coolant ( p. 106)
Coolant (mixed ready to use) (
above radiator fins.

Coolant ( p. 106)
Coolant (mixed ready to use) (
10 mm (0.39 in)
p. 106)
10 mm (0.39 in)
p. 106)
72