Text Memory - Yaesu FT-991 Operating Manual

c M
onteSt

TEXT Memory

The five channels of CW message memory (up to 50 characters each) may also be programmed using a text-entry tech-
nique. This technique is somewhat slower than when you send the message directly from your keyer paddle, but accu-
racy of character spacing is ensured. Be sure to enter the character "}" at the end of texts.
Example 1: CQ CQ CQ DE W6DXC K} (20 characters)
The sequential Contest Number ("Count up") feature is another powerful feature of the CW Memory Keyer.
Example 2: 599 10 200 # K} (15 characters)
t M S
ext eMory torAge
1. Press and hold in the MENU(SETUP) button for
one second to enter the Menu mode.
2. Rotate the MULTI knob to select the CW Memory
Register into which you wish to store the message;
we are now setting the message entry technique to
(Text entry).
017 CW MEMORY 1
018 CW MEMORY 2
019 CW MEMORY 3
020 CW MEMORY 4
021 CW MEMORY 5
A :
dvice
The following texts are programmed to the MEM-
ORY 4 and MEMORY 5 in factory default.
MEMORY 4: DE FT-991 K}
MEMORY 5: R 5NN K}
3. Touch [ SELECT ] on the LCD, then rotate the
MULTI knob to set the selected CW Memory Regis-
ter to "TEXT". If you want to use text message entry
on all memories, set all five Menu items (#017 ~
021) to "TEXT".
4. Touch [ ENTER ] on the LCD to save the new set-
ting.
5. Press the MENU(SETUP) button or touch [ BACK ]
on the LCD to exit to normal operation.
TEXT CW CODE TEXT
! SN
" AF
#
$ SX
% KA
FT-991 O
peraTing
Cw C
k
eyer ( u
eMory
Sing the
CW CODE TEXT CW CODE
& AS + AR
´ WG , MIM
( KN - DU
) KK . AAA
/ DN
＊
M
anual
onvenienCe
o Fh-2 r
ptionAl eMote
MENU(SETUP) Button
TEXT CW CODE TEXT
: OS ?
;
KR @
< [
= BT
￥ （＼）
> }
f
eaTures
)
c k
ontrol eypAd
MULTI Knob
CW CODE TEXT CW CODE
IMI ^
@ _ IQ
}
AL
Page 69