Using Sp Modes; Adjusting Registration And Magnification; Test Pattern Print (Sp) - Ricoh M052 Service Manual

Using SP Modes

5.18 USING SP MODES

5.18.1 ADJUSTING REGISTRATION AND MAGNIFICATION

To adjust the registration and magnification, you need to use several service programs. The
chart shows an example of the procedure to adjust the machine in the basic configuration.
1. Output a pattern (SP5-902).
2. Adjust the sub-scan registration (SP1-001).
3. Adjust the main-scan registration of each paper tray (SP1-002).
4. Output a scanned image.
5. Adjust the main-scan magnification (SP2-112).
6. Adjust the sub-scan magnification (SP2-113).
7. Adjust the main-scan registration of the scanner (SP4-011).
8. Adjust the sub-scan registration of the scanner (SP4-010).
5.18.2 TEST PATTERN PRINT (SP 5902)
⇒
Executing Test Pattern Printing
1. Specify the pattern number using SP5902-003.
2. Select "OK".
3. Select SP5902-001 (1 sheet print) or SP5902-002 (continuous), and then press "Execute".
Test Patterns
No.
0 (No print)
1 Vertical Line (1dot)
2 Vertical Line (2dot)
3 Horizontal Line (1dot)
4 Horizontal Line (2dot)
5 Grid Vertical Line
M052/M053/M054
Test Patterns Using BICU
Pattern
5-206
Rev. 05/16/2012
SM