Remarks; Display On The Control Panel Screen - Ricoh M052 Service Manual

Change SP5169 from "1" to "0".
Turn the machine off and on. Tell the administrator that you have completed servicing
the machine.
The Administrator will then set the "Service Mode Lock" to ON.

5.1.3 REMARKS

Display on the Control Panel Screen

The maximum number of characters which can show on the control panel screen is limited to 30
characters. For this reason, some of the SP modes shown on the screen need to be
abbreviated. The following are abbreviations used for the SP modes for which the full
description is over 20 characters.
Paper Weight
2
Thin paper: 52-59 g/m
Plain Paper: 60-90 g/m
Middle Thick: 91-105 g/m
Thick Paper 1: 106-169 g/m
Thick Paper 2: 170-220 g/m
Thick Paper 3: 221-256 g/m
Paper Type
N: Normal paper
MTH: Middle thick paper
TH: Thick paper
Color Mode [Color]
[K]: Black in B&W mode
[Y], [M], or [C]: Yellow, Magenta, or Cyan in Full Color mode
[YMC]: Only for Yellow, Magenta, and Cyan
[FC]: Full Color mode
[FC, K], [FC, Y], [FC, M], or [FC, C]: Black, Yellow, Magenta, or Cyan in full color mode
Print Mode
S: Simplex
D: Duplex
SM
2
, 16-24lb.
2
, 24-28lb.
2
, 28.5-44.9lb.
2
, 45-58lb.
2,
59-68lb
Paper Feed Station
P: Paper tray
B: By-pass table
Process Speed
L: Low speed
M: Medium speed
H: High speed
5-5
Service Program
M052/M053/M054