Ricoh M052 Service Manual page 557

System Switch 10 [SP No. 1-101-017]
No FUNCTION
Threshold memory level for
0-7
parallel memory transmission
System Switch 11 [SP No. 1-101-018]
No FUNCTION
TTI printing position
0: Superimposed on the page
0 data
1: Printed before the data
leading edge
1 Not used
2 Not used
TTI printing type
3 0: Address unit
1: File unit
4-6 Not used
7 Not used
SM
COMMENTS
Threshold = N x 128 KB + 256 KB
N can be between 00 - FF(H)
Default setting: 02(H) = 512 KB
COMMENTS
Change this bit to 1 if the TTI overprints
information that the customer considers to be
important (G3 transmissions).
NOTE: If "1" is selected, it is possible that sent
data is printed on two sheets of paper.
Japan Only
Do not change the factory settings.
TTI printing unit can be selected.
Do not change the factory settings.
Japan Only
51
Bit Switches
M381