Outline Of Sd Card Appli Move - Ricoh M052 Service Manual

5.15 SD CARD APPLI MOVE
5.15.1 OVERVIEW
The service program "SD Card Appli Move" (SP5-873) lets you to copy application programs
from one SD card to another SD card.
Slot 1 and Slot 2 are used to store application programs. However, more than two optional
applications are supplied for this machine. In that case, you can move application programs
from Slot 2 to Slot 1 with the following procedure.
Consider the following limitations when you try to merge SD cards.
The destination SD card should have the largest memory size of all the application SD
cards. Refer to the following table for the memory size of each SD card.

Outline of SD Card Appli Move:

1. Choose a SD card with enough space.
Do not use an SD card if it has been used on a computer. Normal operation is not
guaranteed when such an SD card is used.
2. Enter SP5873 "SD Card Appli Move". Then move the application from the SD Card in SD
slot 2 (lower slot) to the card in SD slot 1 (upper slot).
3. Exit the SP mode
Use caution when you do the SD Card Appli Move procedure:
The data necessary for authentication is transferred with the application program
from an SD card to another SD card. Authentication fails if you try to use the SD
card after you copy the application program from one card to another card.
4. Remove the SD slot cover (
5. Keep the SD card in a safe place after you have copied the application program from one
card to another card. This is done for the following reasons:
1) The SD card can be the only proof that the user is licensed to use the application
program.
2) You may need to check the SD card and its data to solve a problem in the future.
SM
x 1).
5-197
SD Card Appli Move
M052/M053/M054