Ricoh M052 Service Manual page 337

are not counted separately).
A fax broadcast is counted only after all the faxes have been sent to their destinations. If
one transmission generates an error, then the broadcast will not be counted until the
transmission has been completed.
A printed fax report counts as one job for the F: counter.
The F: counter does not distinguish between fax sending or receiving.
When a copy job on the document server is printed, SP8022 also increments, and when a
print job stored on the document server is printed, SP8024 also increments.
When an original is both copied and stored on the document server, the C: and L: counters
both increment.
When a print job is stored on the document server, only the L: counter increments.
When the user presses the Document Server button to store the job on the document
server, only the L: counter increments.
When the user enters document server mode and prints data stored on the document
server, only the L: counter increments.
When an image received from Palm 2 is received and stored, the L: counter increments.
When the customer prints a report (user code list, for example), the O: counter increments.
However, for fax reports and reports executed from the fax application, the F: counter
increments.
8 011 T:Jobs/LS
8 012 C:Jobs/LS
8 013 F:Jobs/LS
8 014 P:Jobs/LS
8 015 S:Jobs/LS
8 016 L:Jobs/LS
8 017 O:Jobs/LS
When a scan job is sent to the document server, the S: counter increments. When you
enter document server mode and then scan an original, the L: counter increments.
When a print job is sent to the document server, the P: counter increments.
When a network application sends data to the document server, the O: counter increments.
When an image from Palm 2 is stored on the document server, the O: counter increments.
When a fax is sent to the document server, the F: counter increments.
SM
*CTL
*CTL
These SPs count the number of jobs stored to the
document server by each application, to reveal how
*CTL
local storage is being used for input.
*CTL
[0 to 9999999/ 0 / 1]
The L: counter counts the number of jobs stored
*CTL
from within the document server mode screen at
the operation panel.
*CTL
*CTL
5-121
System SP8-xxx
M052/M053/M054