Ricoh M052 Service Manual page 558

Bit Switches
System Switch 12 [SP No. 1-101-019]
No FUNCTION
TTI printing position in the
0-7
main scan direction
System Switch 13 - Not used (do not change these settings)
System Switch 14 - Not used (do not change these settings)
M381
COMMENTS
TTI: 08 to 92 (BCD) mm
Input even numbers only.
This setting determines the print start position for
the TTI from the left edge of the paper. If the TTI is
moved too far to the right, it may overwrite the file
number which is on the top right of the page. On
an A4 page, if the TTI is moved over by more than
50 mm, it may overwrite the page number.
52 SM