Ricoh M052 Service Manual page 336

System SP8-xxx
Abbreviation
Svr
TonEnd
TonSave
TXJob
YMC
YMCK
All of the Group 8 SPs are reset with SP5 801 1 Memory All Clear.
T:Total Jobs
8 001
8 002 C:Total Jobs
8 003 F:Total Jobs
8 004 P:Total Jobs
8 005 S:Total Jobs
8 006 L:Total Jobs
These SPs reveal the number of times an application is used, not the number of pages
processed.
When an application is opened for image input or output, this counts as one job.
Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.
Only jobs executed by the customer are counted. Jobs executed by the customer engineer
using the SP modes are not counted.
When using secure printing (when a password is required to start the print job), the job is
counted at the time when either "Delete Data" or "Specify Output" is specified.
A job is counted as a fax job when the job is stored for sending.
When a fax is received to fax memory, the F: counter increments but the L: counter does
not (the document server is not used).
A fax broadcast counts as one job for the F: counter (the fax destinations in the broadcast
M052/M053/M054
Server
Toner End
Toner Save
Send, Transmission
Yellow, Magenta, Cyan
Yellow, Magenta, Cyan, Black
*CTL
These SPs count the number of times each
application is used to do a job.
*CTL
[0 to 9999999/ 0 / 1]
*CTL
Note: The L: counter is the total number of times the
other applications are used to send a job to the
*CTL
document server, plus the number of times a file
*CTL
already on the document server is used.
*CTL
5-120
What it means
SM