Ricoh M052 Service Manual page 286

System SP5-xxx
[NV-RAM Data Upload]
Uploads the UP and SP mode data (except for counters and the serial
5824
number) from the NVRAM to an SD card. For details, see the "NVRAM Data
Upload/Download" in the "System Maintenance Reference" of the Field
Service Manual.
001 -
[NV-RAM Data Download]
Downloads the UP and SP mode data from an SD card to the NVRAM. For
5825
details, see the "NVRAM Data Upload/Download" in the "System
Maintenance Reference" of the Field Service Manual.
001 -
5828 [Network Setting]
1284 Compatibility
050
(Centro)
052 ECP (Centro)
065 Job Spooling
Job Spooling Clear:
066
Start Time
M052/M053/M054
# -
# -
*CTL
-
Enables or disables 1284 Compatibility.
0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
Enables or disables ECP Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
This SP is activated only when SP5-828-50
is set to "1".
Enables/disables Job Spooling.
[0 or 1 / 0 / 1 / step]
0: Disabled, 1: Enabled
Treatment of the job when a spooled job exists at
power on.
0: ON (Data is cleared)
1: OFF (Automatically printed)
5-70 SM