Service Program (Sp) Modes; Entering Sp Mode - Ricoh B010 Service Manual

SERVICE PROGRAM (SP) MODES

5.3 SERVICE PROGRAM (SP) MODES

5.3.1 ENTERING SP MODE

To enter and leave SP Mode
1. On the operation panel, press #.
2. On the key pad, press  
3. Hold down E for 3 seconds.
4. On the touch panel, press Copy SP.
-or-
5. If the machine has a printer controller, press Copy SP/Printer SP.
6. To leave the SP Mode, press the Exit button in the upper right corner.
Switching between SP Mode and Copy Mode
Use the Copy Mode and SP Mode buttons on the touch panel to toggle between
the Copy Mode screen and the SP Mode screen.
1. Enter the copy SP mode. ( 5.3.1)
2. On the touch panel, press Copy Mode [A] to return to the initial screen.
3. Select the paper size and print mode.
4. Press SP Mode [B] to return to the SP Mode screen.
B010
B010S508.WMF
[A]
B010S510.WMF
5-10
Rev. 3/2002
SM