Ricoh M052 Service Manual page 340

System SP8-xxx
T:FIN Jobs
8 061
These SPs total the finishing methods. The finishing method is specified
by the application.
C:FIN Jobs
8 062
These SPs total finishing methods for copy jobs only. The finishing method
is specified by the application.
F:FIN Jobs
These SPs total finishing methods for fax jobs only. The finishing method
8 063
is specified by the application.
Note: Finishing features for fax jobs are not available at this time.
P:FIN Jobs
8 064
These SPs total finishing methods for print jobs only. The finishing method
is specified by the application.
S:FIN Jobs
These SPs total finishing methods for scan jobs only. The finishing method
8 065
is specified by the application.
Note: Finishing features for scan jobs are not available at this time.
L:FIN Jobs
These SPs total finishing methods for jobs output from within the
8 066
document server mode screen at the operation panel. The finishing
method is specified from the print window within document server mode.
O:FIN Jobs
These SPs total finishing methods for jobs executed by an external
8 067
application, over the network. The finishing method is specified by the
application.
8 06x 1 Sort
8 06x 2 Stack
M052/M053/M054
*CTL [0 to 9999999/ 0 / 1]
*CTL
[0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL
[0 to 9999999/ 0 / 1]
*CTL
[0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
Number of jobs started in Sort mode. When a stored
copy job is set for Sort and then stored on the
document server, the L: counter increments. (See
SP8 066 1)
Number of jobs started out of Sort mode.
5-124 SM