Ricoh M052 Service Manual page 265

[Authentication Error Code]
5481
These SP codes determine how the authentication failures are displayed.
001 System Log Disp
002 Panel Disp
5490 [MF KeyCard (Japan only)]
001 Job Permit Setting
5501 [PM Alarm]
001 PM Alarm Level
002 Original Count Alarm
SM
Determines whether an error code appears
in the system log after a user authentication
*CTL failure occurs.
[0 or 1/ 0 /1]
0: Off, 1: On
Determines whether an error code appears
on the operation panel after a user
*CTL authentication failure occurs.
[0 or 1/ 1 /1]
1: On, 0: Off
Sets up operation of the machine with a
keycard.
[0 to 1 / 0 / 1]
*CTL 0: Disabled. Cancels operation without a
user code.
1: Enabled. Allows operation without a user
code.
*CTL -
[0 to 9999 / 0 / 1 /step]
0: Alarm off
1 to 9999: Alarm goes off when Value (1 to 9999)
x 1000 > PM counter
[0 or 1 / 0 / – ]
0: No alarm sounds
1: Alarm sounds after the number of originals
passing through the ARDF > 10,000
5-49
System SP5-xxx
M052/M053/M054